I-Like PU Foam Spray is made of high quality polyurethane material, this product has a large expansion capacity, and can be hardened within air moisture. Its harden surface can be painted, and the temperature-resistance is from -40 to 90 degrees centigrades. It can be adhere to all building materials and applied to insulating and filling of larger seams, joints, cracks such as gaps between walls, windows and doors, unreachable areas around pipes, etc. It has good performances in anti-freezing, anti-moisture, noise-resistant and heat insulation.
PU Foam Sealant series include the following items:
1. Construction PU Foam
2. Fire Proof PU Foam
3. Winter PU Foam
4. PU Foam Cleaner
Directions:
1. Make sure surface is free of oil and dirt.
2. Shake can vigorously;
3. Install PU foam gun or spraying straw to the valve according to the instruction.
4. Convert the can, then press trigger, there would be foam flowing out.
5. In a general way, just fill in the hole or gap by 70% when gun-type, and 50% when straw-type.
6. Polyurethane foam sealants require some humidity in order to cure properly. For best results, apply in temperatures between 60-100°F (16-38°C). Allow foam to cure fully before replacing baseboards, window or door frames.
7. Paint outdoor applications to avoid discoloration. Wait until foam is rigid before painting or trimming (30-60 minutes).
Uses for Foam
Around the house
Living Space:
Gapping baseboards
Window & door frames
Around electrical junction boxes (not inside them!)
Wire and pipe penetrations
Air, heating and dryer vents
Basements/Attics:
Pipe and duct penetrations
Plumbing stacks and shafts
Wall cracks
Along the sillplate and floor/wall junction
Outside
Exterior Home:
At the bottom of your siding edge, where it meets the foundation
Electric, gas and A/C penetrations
Along garage ceiling and wall joints
Faucets
Dryer vents
Landscaping:
In holes in trees, to slow rot and prevent infestation
Securing landscape blocks
Stone wall repair
Koi ponds, waterfalls, and fountains; for repairs or directing water flow
Creative Arts and Crafts
Creating sculptures
Artificial rocks for landscaping
Securing silk floral arrangements
Halloween costumes and props
Precautions:
1. Keep out of the reach of children
2. Protect from sunlight and do not expose to temperatures exceeding 50ºC
3. Do not pierce or burn, even after use.
4. Do not spray on a naked flame or any incandescent material.
5. Keep away from sources of ignition. No smoking when operating.
6. Foam is highly adhesive, and dried foam is very difficult to remove. Wear gloves, eye protection, a hat and work clothes. Cover any areas you do not want exposed to foam. Use drop cloths when working with polyurethane foam.
7. Clean spills immediately (before foam dries) with acetone or nail polish remover containing acetone. DO NOT USE WATER (moisture helps to cure foam). Do not attempt to remove cured foam with solvents. Cured foam wears off and is not harmful to health.
Package:
| Item No.: |
ID-101 |
| Can Size: |
∮65mmx 300mm H |
| Package: |
750ml x 12pcs/ctn |
| Carton Size: |
280x210x352 mm |
| 20ftContainer Loading |
1296 cartons |
Audited Supplier 
){kind=link}